Product Description Outline LXVBF-200 high temperature resistance nylon vacuum bag film is a blue film with outstanding performance.It can resist temperatures up to 230 ℃.With European most advanced fully automated production equipment,the nylon vacuum bag film is produced by five co-extrusion technology.The maximum width is to 16 meters, which is only can be produced by Longxing company in China. Application With excellent ductility LXVBF-200 high temperature resistance vacuum bag film can meet the requirements of various shapes; and its high temperature resistance properties make it easy to apply a variety of common technical requirements.It is very suitable for the current rise demand of hot tank technology, high-temperature vacuum prepreg molding;It can be used to manufacture the main load-bearing components of military aircraft, such as the fuselage, grab boxes, rudder, elevator, vertical tail, horizontal tail, etc; It is also widely used for the missiles,satellites and launch vehicles areit. not easy to purple fade, not easily damaged in operation. Physical performance Index Technical Requirements Thickness / mm 0.050,0.065,0.075 Color Purple Elongation / (%) > 300 Tensile strength / MPa > 90 Tear Strength / (N / cm) > 160 Density / (g / cm3) 1.09 to 1.15 Heat Temperature / ℃ 230 Width / m 1.2-16 Note: The above table width can be customized according to customer requirements specific thickness deviation does not exceed ± 0.005. In addition to the above, can also be requested by the ordering party. Note: All nylon-based films are hygroscopic material, so the use and storage conditions of the material is recommended at about 20 ℃, relative humidity between 55% -65%. Data sheet only provided for informational purposes and does not constitute any assurance products. As the conditions and the use of different methods are beyond our control, the Company does not undertake direct, indirect, special, incidental, or consequential damages and compensation for the use of this manual or product incorrectly caused.
|