Product Description

Outline

LXVBF-170 is an excellent elongation of five co-extruded nylon vacuum bag film, With European most advanced fully automated production equipment,the nylon vacuum bag film is produced by five co-extrusion technology.The maximum width is to 16 meters, which is only can be produced by Longxing company in China.

Application

LXVBF-170 is a five-layer co-extruded type vacuum film, has been widely recognized, and it can provide greater security. This multilayer structure reduces pinholes, brittleness problems, through the use of a variety of characteristics of the multilayer material, avoiding weakness of a single material. LXVBF-170 vacuum bag film has high elongation, high temperature resistance characteristics, the maximum temperature can be to 170 ° C, the bag film is suitable for unsaturated polyester, vinyl and epoxy resin systems for the wind power industry, automobile, shipbuilding industry and other industries vacuum infusion molding, but also the best choice for low-temperature autoclave process. The bag film is transparent light yellow, which is easier to observe the resin flow.

Physical performance

Index
  Technical Requirements
 
Thickness / mm
  0.050,0.065,0.075
 
Color
  Yellowish
 
Elongation / (%)
  > 300
 
Tensile strength / MPa
  > 40
 
Tear Strength / (N / cm)
  > 100
 
Density / (g / cm3)
  1.02 to 1.13
 
Heat Temperature / ℃
  170
 
Width / m
  1.2-16
 

Note: The above table width can be customized according to customer requirements specific thickness deviation does not exceed ± 0.005. In addition to the above, can also be requested by the ordering party.

Note: All nylon matrix material toughening films have moisture, so the use and storage conditions of the material is recommended at about 20 ℃, relative humidity between 55% -65%. Data sheet provided for informational purposes only and does not constitute any assurance products. As the conditions and the use of different methods are beyond our control, the Company does not undertake direct, indirect, special, incidental, or consequential damages and compensation for the use of this manual or product incorrectly caused.