Product Description

Outline

LXVBF-150 nylon vacuum bag film is transparent light yellow film,which is also an economical five co-extruded type vacuum film with soft, pliable characters.With European most advanced fully automated production equipment,the nylon vacuum bag film is produced by five co-extrusion technology.The maximum width is to 16 meters, which is only can be produced by Longxing company in China.

Application

LXVBF-150 nylon vacuum bag film having a high elongation and tensile strength, the recommended maximum operating temperature does not exceed 150 ℃, suitable for unsaturated, vacuum infusion vinyl resin, epoxy resin systems, vacuum infusion, etc. It is widely used for boat equipment, wind power generation equipment, aerospace equipment, high-speed railway equipment, sports equipment, and electrical and electronic equipment production structure. The bag film is transparent light yellow, which is easier to observe the resin flow.

Physical performance

Index
  Technical Requirements
 
Thickness / mm
  0.050,0.065,0.075
 
Color
  Yellowish
 
Elongation / (%)
  > 300
 
Tensile strength / MPa
  > 40
 
Tear Strength / (N / cm)
  > 100
 
Density / (g / cm3)
  1.02 to 1.15
 
Heat Temperature / ℃
  150
 
Width / m
  1.2-16
 

Note: The above table width can be customized according to customer requirements specific thickness deviation does not exceed ± 0.005. In addition to the above, can also be requested by the ordering party.

Note: LXVBF-150 nylon vacuum bag film is a film absorbs water, use of polyethylene film wrap and stored at about 55% -65% RH and about 20 ℃ environment, the film is not recommended for autoclave processes. Data sheet provided for informational purposes only and does not constitute any assurance products. As the conditions and the use of different methods are beyond our control, the Company does not undertake direct, indirect, special, incidental, or consequential damages and compensation for the use of this manual or product incorrectly caused.