Product Description

Outline

LXVBF-120 nylon vacuum bag film is a light yellow, five co-extruded film vacuum-type with charactors of soft and pliable.With European most advanced fully automated production equipment,the nylon vacuum bag film is produced by five co-extrusion technology.The maximum width is to 16 meters, which is only can be produced by Longxing company in China.

Application

Excellent ductility LXVBF-120 nylon vacuum bag film so that it can meet the requirements of various shapes; its high temperature properties make it easy to apply to "vacuum infusion resin" and "wet vacuum" two processes, the curing temperature requirements below 120 ° C; With the color of  yellow it is  very easy to identify and easy to observe fading.

LXVBF-120 is widely used in the production of nylon vacuum bag film yachts, blades, nacelle, car surrounded, bonnet, helmets and other components, products, high strength, light weight.

Physical performance

Index
  Technical Requirements
 
Thickness / mm
  0.050,0.065,0.075
 
Color
  Yellowish
 
Elongation / (%)
  > 300
 
Tensile strength / MPa
  > 40
 
Tear Strength / (N / cm)
  > 100
 
Density / (g / cm3)
  0.97 to 1.05
 
Heat Temperature / ℃
  120
 
Width / m
  1.2-16
 

Note: The above table width can be customized according to customer requirements specific thickness deviation does not exceed ± 0.005. In addition to the above, can also be requested by the ordering party.

Note: LXVBF-120 nylon vacuum bag film is a film absorbs water, use of polyethylene film wrap and stored at about 55% -65% RH and about 20 ℃ environment. Data sheet provided for informational purposes only and does not constitute any assurance products. As the conditions and the use of different methods are beyond our control, the Company does not undertake direct, indirect, special, incidental, or consequential damages and compensation for the use of this manual or product incorrectly caused.